Rocstor
ROCWAVE

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

The Rocwave Convertible Pro series, equipped with field-proven Digital Signal Processor, is the ideal UPS system for Servers, Networks, Storage, Telecommunications and Industrial Equipment. 

  • Rack Mount and/or Tower Design
  • Advanced Digital Control Technology
  • Wide Input Voltage and Frequency Windows
  • Programmable Receptacles
  • Unity Input Power Factor
  • Double Conversion Online Technology
  • Customer Options Slot
  • Optional Manual Bypass
  • Hot Swappable Battery
  • Emergency Shutdown Control through EPO
  • Matching Battery Cabinet
  • Extended Runtime Capability
  • Super Compact Convertible Design
  • Powerful Built-in Charger

Rack Mount and/or Tower Design
Enables integration into a wide variety of environments.

Advanced Digital Control Technology
Achieves higher reliability and greater immunity from Utility power problems to the connected load.

Wide Input Frequency and Voltage Windows
A wide input frequency window from 45Hz to 65Hz and a voltage input window of 60~144Vac extend battery life.

Unity Input Power Factor
Meets today’s industry standard for energy saving and low current harmonic pollution to the Utility.

Double Conversion On-line Technology
Power disturbances from the Utility are eliminated because the UPS regenerates the power to provide clean electricity.

User Friendly Display
An easy-to-read LED display provides real-time indication of all major system parameters and system status including load level, battery level, bad battery, site wiring fault, overload, programmable outlet status…etc for easy service.  Optional LCD display is also available when placing an order.

Emergency Shutdown Control Through EPO
Allows users to shut down the UPS completely in an emergency to ensure a safe operating environment.

Programmable Receptacles
Remote Reboot and Load Shedding via software reserving back-up power for critical loads.

Hot Swappable Battery
Allows battery replacement without UPS or critical load interruption.

Powerful Built-in Charger
Provides approximately 0.3C charging ability to re-charge internal battery to 90% in 3 hours. Optional battery Charger may extend battery runtime up to maximum required.
 
The Communication Software
The bundled communication software allows the control of the UPS and graceful shutdown when Utility fails.
Users Can;

  • Remotely test the major operating functions of the UPS,
  • Communicate via SNMP/Web/Network adapter,
  • Access UPS functions via the Web,
  • Alert users via SMS messages about specific events.

Customer Options Slot
The Options Slot allows further flexibility in Network configuration.  An internal
2nd RS232 card, 2nd USB card, WEB/SNMP card and Dry Contact card provide isolated contacts for industrial and remote alarm panel application.

Downloadable Setting Tool
Voltage Configuration, UPS Mode Selection, Output Voltage Fine Tuning, Bypass Voltage Window, Frequency Synchronized Window and Programmable Outlet Setting can be re-configured by the setting tool.

Matching Battery Cabinet
Standard matching battery cabinets are available to easily extend the UPS runtime easily to several hours.

Extended Runtime Capability
Enables users to connect additional battery banks by simply plugging in the battery connectors between the UPS and battery banks without requiring additional chargers.

Optional External Bypass Switch
Ensures continuous supply of power to the critical load in the event of electronic failure, overload, over-heating or scheduled maintenance.

Galvanic Isolation Transformer Models Also Available
For those who need galvanic isolation protection, you may choose the models with built-in transformer or charger.

Patent RS232 and USB Communication Interfaces
The patented technology allows the RS232, USB and SNMP slot to be activated simultaneously.

Super Compact Convertible Design
The convertible design enables integration into a wide variety of environments and different Rack sizes with optional accessories. 

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

Technical Specifications

Model RPR 3000 TRM2U
INPUT
Voltage Window 60/70/80~144 Vac
Frequency 50/60+/-5%(Auto Sensing)
Phase/Wire Single, Line + Neutral + Ground
Power Factor >0.99(Full Load)
OUTPUT
Voltage (Vac) 100/110/115/120/127
Voltage Regulation <±0.1% until low battery warning
Capacity(VA/W) 3000/2100
Power Factor 0.7 Lagging
Wave Form Sine Wave, THD<3%(no load to full load)
Frequency Stability ±0.1% unless synchronized to line
Frequency Regulation 3Hz or 1Hz (Setting by software)
Transfer Time 0 m sec
Crest Factor 3:1
Efficiency(AC to AC) >88%
Autonomy (Built-in Battery) >5min
DC Start Yes
BATTERY
Type Sealed Lead Acid Maintenance Free
Capacity 9Ah
Quantity(pcs) 6
Voltage(Vdc) 72
Recharge Time 3 hours to 90%
Built-in Charger
(max. Charging Current)
2.7A
DISPLAY
LED Normal, Battery, Bypass, Programmable Outlet 1, Programmable Outlet 2, Self-Test, Battery Weak & Bad, Site Wiring Fault , Fault, Overload, and Load/Battery Level conditions.
Key On button / Off button (Test / Alarm silence button)
Self-Diagnostics Upon Power On and Software Control
PROTECTION
Overload
AC Mode & Backup Mode(delay before switching to bypass)
<105% continuously.
>106%~120% for 30 seconds transfer to bypass
>121%~150% for 10 seconds transfer to bypass
>150% immediately transfer to bypass
Buzzer continuously alarms
Bypass Mode <105% continuously.
>106%~120% for 250 seconds shut down
>121%~130% for 125 seconds shut down
>131%~135% for 50 seconds shut down
>136%~145% for 20 seconds shut down
>146%~148% for 5 seconds shut down
>149%~157% for 2 seconds shut down
>158%~176% for 1 seconds shut down
>177%~187% for 0.32 seconds shut down
>188% for 0.16 seconds shut down
Buzzer continuously alarms
Short Circuit Hold Whole System
Overheat AC Mode: Switch to Bypass; Backup Mode: UPS shuts down immediately
Battery Low Alarm and Switch Off
EPO UPS shuts down immediately
Battery Advanced Battery Discharge Management (ABDM)
Noise Suppression 115V System 400 Joules
ALARMS
Audible and Visual Line Failure, Battery Low, Overload, System Fault Conditions
PHYSICAL
Dimensions
WxHxD (mm/inch)
440x88x650 / 17.3”x3.5”x25.6”
Inlet (NEMA) L5-30P
NEMA 120Vac 2 x5-15R + 1xL5-30R+2 x5-15R(Programmable)
Net Weight(kgs/lbs) 29.7/65.4
ENVIRONMENT
Operating Temperature 0℃~40℃ / 32℉~104℉
Temperature Warning The battery design life is based on a temperature of 25℃ / 77℉.
Ambient temperature above this range will reduce battery life.
Altitude 0~2000m/6600ft up to 40℃ / 104℉, 3000m/9900ft up to 35℃/ 95℉
Humidity 90% RH Maximum, Non-Condensing
Noise < 50dB (at 1meter/3.3ft)
COMPUTER INTERFACE
Interface Type Standard RS232 and USB Interfaces
Communication Slots Relay Contact board, SNMP/WEB card, etc.
Compatible Platforms Windows 95/98/NT/2000/XP/Vista
SAFETY CONFORMANCE
Quality Assurance ISO9001 Certified Company
Safety Standard EN62040-3 complied
Performance EN62040-3 complied
EMC Standard EN62040-2, EN61000-3-2, EN61000-3-3, FCC Class A
Marks UL, cUL
 

Specifications are subject to change without prior notice.

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

Extended Battery Bank

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

Runtime

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

Product Images

ROCWAVE
ROCWAVE ROCWAVE ROCWAVE ROCWAVE
ROCWAVE ROCWAVE ROCWAVE

Battery Bank

ROCWAVE ROCWAVE ROCWAVE ROCWAVE
ROCWAVE ROCWAVE

ROCWAVE - RPR 3000 TRM2U

Intelligent On-line UPS

Documents

User Manual
EnglishEnglishEnglish User Manual
Battery Bank Installations User Manual
Marketing Materials
EnglishEnglishEnglish Brochure